[ Description & Specifications ]
Our LS series has been designed for an industrial use, to extract different kind of dust and dry shavings from a single or multiple dust sources.
The blower is fitted with a high efficiency centrifugal fan with curving blades. The fan is positioned inside the unit and therefore soundproofed to obtain a low sound level.
Its fine filter material ensures you a residual dust content of less than 0.1mg/m³.
Its fine filter material ensures you a residual dust content of less than 0.1mg/m3.
ULTIMATE DRY DUST CONTROL SOLUTION FOR WIDE RANGE OF APPLICATIONS
Featuring a built-in Fire Control system to prevent fire danger.
|
SPECIFICATIONS |
LS-500ED2/ECD2 |
| Inlet size | 250 mm (12") |
| Motor | 3.7 KW(5HP) |
| Air Flow | 88 CMM (3,108 CFM) @60Hz |
| Static Pressure (Max) | 3,800 Pa @60Hz |
| Filter Cleaning | by compressed air |
| Filter Material (LS-500ED2) | L-PET, 5 μm |
| L-PET + Teflon coating, 0.5 μm | |
| Filter Material (LS-500ECD2) | Polyester, 10 μm |
| Polyester + Teflon Membrane, 0.5 μm | |
| Number of Filters | 36 pcs bag filters ( (LS-500ED2) |
| 10 pcs cartridges (LS-500ECD2) | |
| Filter area | 14.4 m² (LS-500ED2) / 48 m² (LS-500ECD2) |
| Dust Tank Volume | 0.23 m³ x 2 |
| Air pressure requirements | 6 ~ 8 kgs / cm² (5.8~7.8 bar) |
| Noise Rate | MAX. 82 dB |
| Inlet Diameter | 250mm / 100mm x 5 (optional) |
| N.W. / G.W. | 450 / 540 kg (LS-500ED2) |
| 465 / 575 kg (LS-500ECD2) | |
| Packing Dimensions | 2.61L x 0.76W x 2.18H (m) |
Note: To enhance the quality and functionality of the equipment, the manufacturer reserves the right to make design changes without prior notice after the changes have been implemented.